Chitongda YL-007M2 Manuel d'utilisateur télécharger pdf (Page 23)

If you answer the call, you will hear the pre-record voice. You can set

system via your telephone or mobile phone keypad.

If you hang-up directly without answering the call, the system will call

each preset number for 3 times circularly.

Press [*]: Read the alarm information.

Press [1]: Main unit stops alarming and Arm; it stops calling users.

Press [2]: Main unit stops alarming and Disarm; it stops calling users.

Press [3]: Siren off and monitors the scene for 30 seconds; for continued

monitoring, press [3] again to monitor for another 30 seconds.

Press [4]: Main unit starts a 30-second two-way intercom. It cannot be

controlled by the mobile during the time of intercom.

7. Remote Control

Dial the number associated to the alarm main unit by phone (mobile

phone), and after one ringing cycle, you can hear a voice prompt “Please

enter password”. If the password is right, you will here “Press 1 to arm,

Press 2 to disarm, Press 3 to Monitor, Press 4 to Intercom”. If the

password is wrong, you will hear a prompt voice “wrong password,

please re-enter”.

Press [1]: arm, if finished successfully, you will hear a voice prompt

“System armed”.

Press [2]: disarm, if finished successfully, you will hear a voice prompt

“System disarmed”.

Press [3]: monitoring for 30 seconds, to continue monitoring, press [3]

again to monitor for another 30 seconds.

Press [4]: two-way intercom for 30 seconds. You can’t operate the main

unit during this time.

8. Emergency Help

Press [Emergency ] button on keypad, or [ ] button on remote

controller or wireless panic button, the main unit will alarm and make call

to the preset user numbers.

9. System Dialing Function

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

Pas de commentaire

Chitongda YL-007M2 Manuel d'utilisateur Page 23