Chitongda YL-007M2 Manuel d'utilisateur télécharger pdf (Page 17)

keyboard operation.

21. Defense Zone Programming

If you want to change the alarm attribute of defense zone, such as turn off

the siren when system alarms, you can do it by defense zone

programming. In setup state, first input [60], then the defense zone

number [01~99], then input defense zone type [1~4], then input defense

zone location number [1~8], and then select siren on/off [0/1], at last

press [#] to confirm. You will hear the main unit emit a long beep and a

voice prompt “setting completed”.

Operating method: [60] [AA] [B] [C] [D] [#]

AA: defense zone number [01~99] means zone 1 to zone 99;

B: defense zone type

[1]: real-time defense zone [2]: 40 seconds delay defense zone

[3]: 24 hours defense zone [4]: bypass defense zone

C: alarm type

[1] SOS Alarm [2] Fire Alarm [3] Gas Leak Alarm

[4] Door Alarm [5] Hall Alarm [6] Window Alarm

[7] Balcony Alarm [8] Boundary Alarm

After setting the alarm type, the corresponding alarm type icon will be

shown on the LCD screen when alarming. And you will hear the alarm

type voice prompt when answering the alarm call.

D: siren ON/OFF: [0] OFF, [1] ON

For example: set defense zone 12 to be 24-hour, fire alarm and siren on

Operating method: [60] [12] [3] [2] [1] [#]

22. Home Arm Defense Zone Setting

Home arm defense: sometimes (for example, when you are at home),

you want some of the sensors work while some do not, you can do

this setting.

In setup state, use keypad to input [61], then choose the corresponding

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Pas de commentaire

Chitongda YL-007M2 Manuel d'utilisateur Page 17